Waterway E-Series Wet End 1 1/2 HP 48 Frame 1 1/2 Inch 310-1130

Waterway wet end 1 1/2 HP E-Series 1 1/2 inch mbt/fpt connections. 48 frame wet end with seal kit and 1 1/2 HP impeller.

• 48 frame through bolt type wet end with 3 drain plug locations at 3,6 and 9 o'clock.
• Suction connection is 1 11/16 inch inner diameter and 2 7/16 inch outer diameter.
• Suction pipe size is 1 1/2 inch.
• Same dimensions for discharge side.
• Center Discharge

Notes for this pump wet end part 310-1130:

Need the seal for this pump wet end type? See/compare PS-200. 

Wet end includes seal and impeller in this complete wet end housing.

Replaces 1-PW10CD15 , 222887 , 310-5130 , 310-5130B , 310-8220 , 428665 , 5016B , 5030-52 , 5030C , 601118 , View More 601122 , 806105061546 , 806105063489 , WWP3101130 , WWP3105130

Tech note:The Waterway center discharge wet end has been discontinued and replaced with the E-Series Center Discharge wet end by the manufacturer. Please be sure which wet end you have as the parts are not interchangeable. The easiest way to identify which wet end you have is to count the number of screws on the faceplate. The old center discharge pump had a 4-screw faceplate and the new E-Series has a 6-screw faceplate. If you need parts for the old center discharge wet ends, you will need to replace the whole wet end with a new E-Series Center Discharge wet end 310-1140.

We also offer the side discharge version of this center discharge wet end, see 310-1130SD.