Waterway E-Series Wet End 2HP 48 Frame 1 1/2 Inch 310-1141

Waterway wet end 2 HP E-Series 1 1/2 inch mbt/fpt connections. 48 frame wet end with seal kit and 2 HP impeller.

• 48 frame through bolt type wet end with 3 drain plug locations at 3,6 and 9 o'clock.
• Suction connection is 1 7/8 inner diameter and 2 7/16 outer diameter.
• Suction pipe size is 1 1/2 inch.
• Same dimensions for discharge side.

Notes for this pump wet end part 310-1141:

The Waterway center discharge wet end has been discontinued and replaced with the E Series center discharge wet end by the manufacturer.

Please be sure which wet end you have as the parts are not interchangeable. The easiest way to identify which wet end you have is to count the number of screws on the faceplate. The old center discharge pump had a 4-screw faceplate and the new E-Series has a 6-screw faceplate. If you need parts for the old center discharge wet ends, you will need to replace the whole wet end with a new E Series center discharge wet end.

Use this wet end along with motor 5040 to replace the Leisure Bay pump 303646 .

Need the seal for this pump wet end type? See PS-200. 

Wet end includes seal and impeller in this complete wet end housing.