Waterway Mini Adjustable Direction Jet 212-1207

Waterway Mini Jet Adjustable Directional Large Face Gray 212-1207 Snap-In Style Jet Insert

Mini Adjustable Directional Large Face 5-Scallop Gray by Waterway Plastics.

Jet face diameter is 3 3/16". The base diameter is 1 7/16" and the length is 1 7/8".

This snap-in style jet has adjustable on-off control.

We also offer compatible single and dual roto insert jets.

Still Available jets that fit this same mini jet body include:

• 212-1200 textured white directional
• 212-1201 textured black
• 212-1207 gray directional (this jet)
• 212-1217 textured gray
• 212-1220 white textured dual roto pulsator
• 212-1227 gray textured twin roto

Do I need nozzles too? 
You may need 212-0880 new style jet nozzle when replacing new jet internals above into an old style jet body as the old nozzle in that body may no longer work with the new jet inserts.

Tech Note: If installing a new jet internal into an old jet body, please note you will need to replace the old nozzle with a new style nozzle offered here if needed: 212-0880 new style 5/16" jet nozzle.

The old-style 212-0870 nozzle is the old 1/4 inch nozzle still available and for use with old mini jets if only the nozzle needs to be replaced into an older jet instead of any of the new jet inserts above.
The old 1/4 inch nozzle should still be inside the old jet body and may need to be removed and replaced with new style nozzle for new jet insert.
New jet bodies already come with the new style 5/16 inch nozzle already installed - but jet inserts such as those listed above do not include the new style jet nozzles that fit into the jet body in place of the old style nozzles.

Jet Tool
You may also need a jet tool helpful in the removal of mini jets, neck jets and old jet nozzles - see tool part 218-3000 or another available Mini Jet tool 218-1500.

 Jet being phased out - see this jet in white 212-1200.

DISCONTINUED, a few remain, once gone  see 212-1247 small face